Deutsch
English
Master B 2 PTC electric heater (B-2PTC)
As units of this type, Master electric fan heaters can be used in many ways. They quickly deliver clean and safe heat. Electric fan heaters are ideally suited to temporary or emergency heating, as they are mobile and easy to use. Thanks to high-quality components, the Master electric fan heaters are very reliable and powerful.The safety details of the Master B 2 PTC electric heater:
- a robust steel housing
- designed for continuous operation
- there is no open flame
- Including KlimaLex.de service
- insensitive to dirt and moisture
- runs on electricity, without fuel
- standard thermostat protects against overheating
- in agriculture
- in workshops
- in garages
- in work and residential containers
- to support dehumidification with condensation dryers
IMPORTANT: Read and understand this operational manual prior to assembling, starting up or conducting maintenance on this heater. Using the heater incorrectly can cause serious or fatal injuries. Keep this manual for further reference.
IMPORTANT: This heater is not suitable for use by persons (including children) with reduced physical, sensory or mental capacities or with lack of experience or knowledge unless supervised by a person responsible for their safety. Children must be supervised to make sure they do not play with the heater.
IMPORTANT: In order to prevent any risk, even if disconnection from the power supply mains is stated, all cleaning, maintenance and repair operations requiring access to dangerous parts (e.g. replacing the damaged power supply cable), must be carried out by the manufacturer, its technical support centre, a person with similar qualification.
IMPORTANT: Comply with all local legislation and current regulations when using the heater.
1.1. Heaters used near tarpaulins, curtains or other similar covering materials must be a safe distance from them. It is advised to use fire-proof covering material.
1.2. Keep the heater a safe distance from humidity, water and atmospheric agents to prevent serious damage to the heater.
1.3. Keep the hot parts of the heater a suitable distance from inflammable or thermolabile materials (including the power supply cable).
1.4. Never move, handle or conduct maintenance on the heater when it is hot, connected to the mains or in operation.
1.5. Avoid fire hazards by placing the hot or functioning heater on a steady level surface.
1.6. Keep animals at a safe distance from the heater.
1.7. Turn on the heater only with a current that has the voltage and frequency values specified on the heater's identification plate.
1.8. Make sure the heater is only connected to suitable mains with a differential switch and suitable earthing.
1.9. If the power supply cable is damaged, it must be replaced by the support centre to prevent any risk.
1.10. Disconnect the heater from the mains power supply when not in use.
1.11. Always disconnect the heater from the mains if temporarily left in unsafe conditions and make sure it cannot be used.
1.12. Never block, not even partially, the heater's air vent or the air outlet.
1.13. Avoid any kind of ducting, either at the air inlet or outlet.
1.14. Do not cover the heater while in operation, it might overheat.
1.15. Ask the support centre to check that the heater is working properly at least once a year and/or as required.
The manufacturer declines any liability for damage/injuries to property/persons deriving from improper use of the heater. Only specialised personnel authorised by the manufacturer can perform work on the heater.
Source: manufacturer's operating manual (Master B 2-3 PTC).
- Shipping Weight
- 12 kg