Condensate pump set Aerial AD 520 & 540

Replacement for the Aerial AD 520 & AD 540 integrated bucket
MSRP 714,00 € −2 %
incl. VAT, plus shipping (Germany from 9,90 €)

or pay directly with
OR

Immediately available! Delivery time 1-5 days.
* is valid for deliveries within Germany, for other countries please see Delivery Time
Product number: Aerial.14442 · EAN: 4260393630963

Manufacturer: Aerial, Dantherm Group A/S, Marienlystvej 65, 7800 Skive, Dänemark, info@danthermgroup.com

Condensate Pump Set for Aerial AD 520 & AD 540

The condensate pump set Aerial AD 520 & 540 is a fully automatic solution for reliably draining condensate for the respective dehumidifier models. This variant differs from the main version, the condensate pump set Aerial AD 40, through specific adaptations for the AD 520 and AD 540 models. Both pump sets provide reliable functionality, but the technical specifications and application possibilities are tailored to the respective requirements of the devices.

The condensate pump set Aerial AD 520 & 540 is ideal for applications where continuous drainage is required. It ensures that condensate is safely and reliably discharged, which is particularly important in humid environments. The pumps are made from robust materials to ensure durability and reliability.

Here are the key similarities and differences between the variants:

  • Design: All models are fully automatic and designed for installation in the dehumidifier.
  • Material: The pumps are made of high-quality plastic and metal, ensuring stability.
  • Application Range: The set is suitable for temperatures from +3 °C to +50 °C.
  • Lift Height: The maximum lift height is 4 meters, which is sufficient for most applications.
  • Flow Rate: With a flow rate of 192 liters per hour, the pump is very powerful.
  • Safety Features: In the event of a pump failure, the device is automatically shut down.
Technical Data
Property Value
Manufacturer Aerial
Material Pump: Plastic, Back Wall: Metal
Tank Volume 1.8 liters
Lift Height 4 m
Operating Range from +3 °C to +50 °C
Flow Rate 192 liters/hour
Supply Voltage 230 volts ~50Hz
Maximum Power Consumption 85 watts
Protection Class IP X4
Dimensions Width: 320 mm, Height: 260 mm, Depth: 170 mm

Additionally, the following accessories can be ordered:

  • Condensate Drain Hose: 12 x 2 mm
  • Hose Coupling: For easy connection
  • Hose Clamps: For secure fastening

Safety instructions

Foreseeable misuse

The pump kit may not be used:

  • In rooms with potentially explosive atmospheres.
  • In rooms with an aggressive atmosphere (e.g. caused by chemicals).
  • In rooms with water with a pH value below 7.0 or above 7.4.
  • In rooms with salt or liquids with a salt content > 1 %, e.g. brine baths.
  • In rooms with ozone-treated air, high solvent concentrations or high dust pollution.

WARNING! Electrocution! Working on live components or water on live components can cause life-threatening electrocution.

  • Avoid contact between water and live components.
  • Before changing the location of the dehumidifier and pump kit, switch it off and then press and hold down the button for manual pump out until there is no more condensate water flowing out of the hose. Then disconnect the mains plug.
  • Each time the pump kit is installed or removed, ensure that the safety relay for the dehumidifier is switched off and the mains cable is disconnected.
  • Check that the pump kit cables are not damaged.
  • Only allow the manufacturer or authorised personnel to carry out work on electric components.

WARNING! Electrocution! Electrocution may occur due to improper or faulty connection to the power supply.

  • Check that the connection cable is compatible with the pump kit connection on the dehumidifier.
  • Ensure that the connection cable is undamaged.

WARNING! Risk of burn!

  • Only allow the manufacturer or authorised personnel to carry out work on internal components.

CAUTION! Risk of injury if pump kit falls out! Pump kit with sliding lock/Secure the lock and check that it fits properly.

Complete emptying before transport and removal The pump must be completely emptied before transporting the dehumidifier and every time the pump kit is dismantled.

WARNING! Electrocution!

  • Before dismantling the pump kit and before transporting the dehumidifier, always make sure that the condensate water has been completely pumped out first.

WARNING! Risk of injury and burns during maintenance work!

  • Each time the pump kit is installed or removed, ensure that the safety relay for the dehumidifier is switched off and the mains cable is disconnected.
  • Only allow the manufacturer or authorised personnel to carry out repairs and maintenance work.
  • In the event of malfunctions, switch off the product and secure it so that it cannot be switched back on again.
  • Allow any hot components to cool sufficiently before working on them.

ATTENTION! Damage to property!

  • Cleaning agents can damage surfaces. Only use mild detergents.
  • Only use approved original spare parts.

ATTENTION! Device may be damaged if stored improperly

  • Never store pump kit below freezing.

ATTENTION! Risk from materials and substances

  • Sort materials according to type and recycle in accordance with local regulations.
  • When disposing of auxiliary and operating materials, observe the local regulations and information on the safety data sheets.

Source: manufacturer's operating instructions (Aerial pump kit).

Manufacturer
Aerial
Depth
17 cm
Power
85 watts
Voltage
230 V
Height
26 cm
Working range
3 to 50°C
Weight
4 kg
Product type
condensate pump
Width
32 cm
IP protection class
IPX4
Shipping Weight
4.2 kg
This item has already been rated. A written review has not yet been submitted.

 
3,99 €

incl. 19 % VAT, excl. Shipping costs

 
1.449,99 €

incl. 19 % VAT, excl. Shipping costs