Dehumid Dehumidifier for Large Rooms
The Brune Dehumid HP 50 dehumidifier is a powerful professional unit designed for targeted humidity reduction in large rooms and demanding environments. With a dehumidification capacity of up to 50 liters per 24 hours and high airflow performance, it is ideal for basements, construction sites, museums, archives, or commercial halls.
Key Benefits
- Up to 50 liters of dehumidification per day
- Suitable for rooms up to 600 m³
- Electronic control with hot gas defrosting – reduced icing
- Wheels and carrying handle for easy mobility
Technical Data
| Property | Value |
|---|---|
| Dehumidification capacity | approx. 45 – 50 L / 24 h |
| Room volume | up to 600 m³ |
| Airflow rate | 885 / 1065 m³/h |
| Noise level | 50 – 55 dB(A) |
| Power consumption | approx. 1220 W |
| Water tank | 20 liters (2×10) |
| Dimensions (W×H×D) | 54×78×48 cm |
| Weight | approx. 42 – 45 kg |
| Refrigerant | R 454C |
| Power supply
Safety instructions 1. General safety instructions The operator must make the operating instructions available to the user and make sure that the user understands the contents.
The appliance can be used by children aged 8 and over and by persons with reduced physical, sensory or mental abilities or lack of experience and/or knowledge if they are supervised or have been instructed in the safe use of the appliance and have understood the resulting hazards. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision. ATTENTION Fire hazard/flammable materials – PLEASE BE SURE TO OBSERVE
2. Safety instructions ATTENTION This dehumidifier must not be used in rooms under the following conditions:
Always connect the appliance earthed: Only operate the appliance with a earthing-contact plug and an earthed socket. The earthing-contact plug is an essential safety feature that helps prevent a risk of fire or electric shock. Protect the power cable from damage: Never operate an appliance with a damaged power cable, as this can lead to fire or electric shock. If the power cable is damaged, it must be replaced with a cable of the same type and the same amperage. Extension cables: Extension cables must be earthed and be able to supply the appropriate voltage to the appliance. Handle the appliance with care: Do not drop the dehumidifier; do not throw it and do not open it by force. Rough handling can damage the components or the cables and cause hazards. Operate the appliance on a stable surface: Only operate the appliance on a stable, level surface, for example on the floor or a sturdy table, so that the dehumidifier cannot fall and cause injury. Keep the appliance away from water: Never operate the appliance in running or standing water - risk of injury from electric shock! Do not store or operate the appliance outdoors. If electrical cables or components become wet, dry them thoroughly before using the appliance. If in doubt, please do not switch on the dehumidifier. Please contact an authorised dealer or a recognised workshop. Keep air inlets clear: Do not place the dehumidifier too close to curtains, walls or other places that could obstruct the air inlet. This can lead to overheating of the appliance and a risk of fire or electric shock. Keep the filter clean: Always use a clean air filter. Prevent any material from clogging the filter. This can lead to overheating of the dehumidifier. Never use the appliance without a filter. Check and clean the filter if necessary, always before you switch on the dehumidifier. Prevent oil, grease or other contaminants from entering the appliance. Keep electrical components dry: Never let water get into the electrical components of the dehumidifier. If electrical cables or components become wet for any reason, dry them thoroughly before using the appliance. If in doubt, please do not switch on the dehumidifier. Please contact an authorised dealer or a recognised workshop. The operator must make the operating instructions available to the user and ensure that the user understands the contents. 5. Assembly and transport Please observe the following instructions for assembly and transport:
6. Operating instructions ATTENTION
Attention: Unplug the mains plug before working on the appliance. 10. Electrical connections This dehumidifier has been designed for an electrical installation of 220-240 V~50Hz. Make sure that the sockets are earthed and all safety precautions have been taken. Source: manufacturer's operating instructions (Brune Dehumid HP 50).
Review product
This item has already been rated. A written review has not yet been submitted.
AccessoriesThe following products fit well to this product.Customers who bought this product also boughtCustomers who bought this item also bought one of the following products. |